Semaphore RTU, PAC and PLC Solutions

Semaphore

 

 

Semaphore offers RTU, PAC and PLC Solutions for automation, asset management and SCADA applications.  From a single point to thousands of points Semaphore offers extremely flexible and cost effective solutions for a variety of industries including Oil & Gas Systems, Electrical G&T Systems, Water and Waste Water systems, Building Controls, and more.

   

 

 

   

 

 

 TBox RTU/PLC Family
TBox  
Semaphore’s T-Box RTU telemetry systems are designed to leverage easy-to-use web technologies along with inexpensive communications networks. They offer up to 50% less total installed cost per point versus traditional SCADA / PLC systems.

T-Box combines the programmable automation of a RTU/PLC with advanced features such as alarm notification, data logging, integral web/FTP server, IP telemetry, and security in a single, ruggedized package.  With more than 40 Protocols built in, TBox can integrate into virtually any existing SCADA, DCS System, RTU/PLC/PAC System, or IT Infrastructure.
 
Spec Sheet
Overview
 TBox All in One RTU Solutions - 32 Bit Processors
TBoxMS
TBox Modular System (MS)

Form Factor:
  Modular
Mounting:  DIN Rail, Panel, 19" Rack
I/O:  Modular - Up to 867 Points per RTU/PLC
Memory:  16MB Flash, 64MB SDRAM, 1MB SRAM
    Expandable via SD/MMC Card up to 32GB
Communications: Up to 19 Ports per RTU
    Two (2) Ethernet Standard - expandable via optional communicaton cards
    Two (2) Serial:  1 each RS232/485 - expandable via optional communicaton cards
    Optional 3G/GSM/GPRS Cellular Modem and/or PSTN Modems
 
Spec Sheet
Spec Sheet
 
TBox LT2
TBox LT2

Form Factor:
  All in One/ Brick
Mounting:  DIN Rail
I/O:
 16 DI/DO (Point by Point selectable - 3 can be HSC)
        8 Analog Inputs, 2 Analog Outputs (Optional)
Memory:  16MB Flash, 64MB SDRAM, 1MB SRAM
    Expandable via MicroSD Card up to 32GB
Communications:
    One (1) Ethernet, One (1) RS232, One (1) RS485, One (1) USB 2.0
    Optional 3G/GSM/GPRS Cellular Modem
 
Spec Sheet
Spec Sheet

TG2
TBox TG2
 

Form Factor:
  All in One/ Brick
Mounting:  DIN Rail
I/O:
 None
Memory:  16MB Flash, 64MB SDRAM, 1MB SRAM
    Expandable via MicroSD Card up to 32GB
Communications:
    One (1) Ethernet, One (1) RS232, One (1) RS485, One (1) USB 2.0
    Optional 3G/GSM/GPRS Cellular Modem
 
Spec Sheet
Spec Sheet
 TBox All in One RTU Solutions - 16 Bit Processors
TBox LT
TBox Lite (LT)
 

Form Factor:
  All in One/ Brick
Mounting:  DIN Rail
I/O:
Various Configurations - Up to 32 I/O Points
Memory:  768 KB Flash, 128KB+256 KB RAM
    Expandable via SD/MMC Card up to 1GB
Communications:
    One (1) Ethernet, One (1) RS232, One (1) RS485, One (1) USB 2.0
    Optional GSM/GPRS Cellular Modem or Spread Spectrum Radio Modem

Spec Sheet
Spec Sheet
 
TBox LP
TBox LP/WM
Form Factors:  All in One/ Brick or Board Level
Power:  Battery only (WM) and Solar + Battery (LP) Options
Mounting:  DIN Rail and Ruggedized Enclosure options
I/O: 
 WM = Up to 4 DI, 4 DO, 2 AI  :  LP = Up to 8 DI, 8 DO, 4 AI
Memory:  768 KB Flash, 128KB+256 KB RAM
    Expandable via SD/MMC Card up to 1GB
Communications:
    One (1) RS232, One (1) RS485
    Optional GSM/GPRS Cellular Modem or Spread Spectrum Radio Modem
Spec Sheet
Spec Sheet
 TBox Remote Ethernet I/O

TBox RM
TBox RM
 
Form Factors:  All in One/ Brick
Mounting:  DIN Rail
I/O: 
Various Configurations available - Up to 32 I/O Points
Protocols:  Modbus TCP/IP, Modbus RTU
Ports:   One (1) Ethernet, One (1) RS485, One (1) RS232 (config only)
Spec Sheet
Spec Sheet
 Kingfisher Family PLC/PAC/RTU
Kingfisher  
The Kingfisher Family RTU is an advanced automation technology platform for SCADA applications. Designed as an enabling technology, Kingfisher brings significant advantages without the technical constraints that have traditionally limited PLC/PAC/RTU applications. The high-performance, 32-bit processing platform works with intelligent communications and I/O modules to meet all scanning and throughput requirements. Numerous advanced features include 70+ protocols built in, IEC-61131-3 programming (5 Languages - LD, ST, FB, FC, IL) and three levels of redundancy — communications, power, and processor — in order to satisfy a range of availability specifications.
 
Spec Sheet
Overview
KF Plus
Kingfisher Plus+
 

Form Factor:
  Modular
Mounting:  Panel, 19" Rack
I/O:  Modular - 4 to 1024 Points per RTU
Memory:  16MB Flash, 32MB RAM
Communications: Up to 16 Ports per RTU

    One (1) Ethernet Port, Two (2) Option Port Slots
    Optional Port Options include Ethernet, Serial, Dial Up Modem, HART, FSK, etc.
 
Spec Sheet
Spec Sheet
 
KF G30
Kingfisher G30
 
Form Factor:  Brick / All In One
Mounting:  Panel, Optional DIN Rail Mount
I/O:  Various Configurations - Up to 32 I/O Points
Memory:  16MB Flash, 32MB SDRAM
Communications:

    One (1) Ethernet Port, One (1) USB 2.0 Port, One (1) Option Port Slot
    Optional Port Options include Ethernet, Serial, Dial Up Modem, HART, FSK, etc.
Spec Sheet
Spec Sheet
 
KF LP3
Kingfisher LP3
 
Form Factor:  Brick / All In One
Mounting:  Panel
I/O:  8 DI, 2 Relay Out, 4 AI, 1 AO
Memory:  4 MB Flash, 512K SRAM
Communications:

    Two (2) RS232/485 Ports, Two (2) Option Port Slots
    Optional Port Options include Ethernet, Serial, Dial Up Modem, HART, FSK, etc.
Spec Sheet
Spec Sheet

 

 

 

 

For more information or to schedule an on site or online demo please contact your local PCD Sales office nearest you.

Skip Navigation Links  © 2014 Process Control Dynamics, Inc. -  6480 S. Quebec St. -  Centennial, CO  80111 -  303.741.4264